Better Warehousing with Forklift Drum Handling Attachments

Forklift drum handling attachments can reduce workplace injuries in the warehousing and distribution sector, improve operational efficiency and reduce... read more >>

Peter Buckley Joins Bunting

Peter Buckley has joined Bunting as the Technical Sales Engineer for general magnetic separation and metal detection equipment in the United Kingdom... read more >>

High Intensity Magnetic Separation at UK Mining Conference

High intensity magnetic separation and enhanced tramp metal magnetic separation is the focus for Bunting at the UK Mining Conference in Cornwall, UK (... read more >>

Metal Separation at E-Waste World Conference 2024

Maximising metal separation and recovery from e-waste is the focus for Bunting on stand C60 at the E-Waste World Conference and Expo - 26-27 June 2024... read more >>

ElectroMax Overband Magnet Power at Hillhead 2024

The compact but powerful characteristics of the ElectroMax Overband Magnet are highlighted on Bunting’s stand C9 at the Hillhead quarrying, construc... read more >>

Bunting Attains Bronze EcoVadis Sustainability Medal

Following the implementation of a series of sustainability initiatives, EcoVadis has awarded Bunting’s European operations a Bronze Sustainability R... read more >>

Bunting Supply Towable Electro Magnetic Sweeper for Indonesian Airport

Bunting has designed and built three (3) large Towable Electro Magnetic Sweepers (model EMRS24) for cleaning an Indonesian airport runway of ferrous m... read more >>

Enhanced Efficiency in Recycling and Waste Management from St Clare Engineering

How forklift drum handling attachments improve efficiency and save costs... read more >>

Industrial Magnetiser Investment for Bunting

To meet the increased demand for magnetic separators following a sustained period of growth, Bunting has redesigned and refurbished the industrial mag... read more >>

Enhanced Metal Recovery with Bunting at IFAT 2024

Technology to effectively separate large and small ferrous and non-ferrous metal is the focus for Bunting at IFAT Munich 2024 (Messe Munchen, Germany,... read more >>

MBA Polymers Install Quick Clean Drawer Magnet

MBA Polymers has installed a new quick manual-clean magnet insert into one of their existing Drawer Filter Magnets installed at their Worksop plastics... read more >>

Laboratory High Intensity Magnetic Separator for Battery Recycling Research

A European mining and technology university has purchased a laboratory-scale Bench Induced Roll Magnetic Separator (BIRS) for use in research projects... read more >>

Grab O Matic Quick Release System for Forklift Drum Handling Attachments Improves Safety and Efficiency for a Wide Range of Customers

How to handle drums fast and safely ... read more >>

Monometer Rotary Furnaces are the Ultimate Solution for Metal Melting and Recycling

When it comes to manufacturing companies requiring furnaces for metal melting and recycling, finding the right equipment is crucial... read more >>

Permanent Overband Magnet Selection Criteria

Permanent Overband Magnets are commonplace in most mines and quarries, removing tramp ferrous metal and protecting crushers, screens and conveyors aga... read more >>

Russell Finex Launches New Ampro Sieve Station Connect the Ultimate Powder Handling Solution

Accelerate your additive manufacturing with the AMPro Sieve Station connect... read more >>

Eriez to Showcase Shred1 Ballistic Metal Separator at 2nd European Green Steel Summit 2024

Eriez, a global leader in separation technologies, announces its participation in the highly anticipated 2nd European Green Steel Summit 2024. ... read more >>

Reducing Shaft Deflection in Mechanical Systems

While shaft deflection is commonly associated with linear motion systems, where precise movement is critical, it can also manifest in rotational syste... read more >>

ICL Boulby Upgrades Magnetic Separators from Bunting Redditch

ICL Boulby is making significant upgrades to their magnetic separators at their mine in North Yorkshire, England... read more >>

Bunting Sponsors BikeBoatBoot Challenge for Ty Hafan

Bunting is sponsoring a group of dads and uncles of children supported by the South Wales children’s hospice Tŷ Hafan who are taking on the 2024 #B... read more >>

New Manual Clean FF Drawer Filter Magnet from Bunting

Bunting’s new manual-clean FF Drawer Filter Magnet features an insert easily retrofitted into existing FF Drawer Filters... read more >>

Keeping Plastic Metal Free at PLAST 2023

Separating and detecting problematic metal contamination is the focus for Bunting at PLAST 2023 (5-8 September 2023, Milan, Italy)... read more >>

New 12 Tonne Crane for Bunting Redditch

A new 12.5-tonne overhead crane and a pillar mounted slewing jib crane are the latest investments at Bunting’s magnetic separator and metal detector... read more >>

Russell Finex Unveils New and Enhanced Website for Streamlined User Experience

The new website offers detailed product information, industry applications, case studies, and insightful articles to find ideal solutions to specific ... read more >>

Bunting Sponsors REPM 2023

Bunting has signed up as a gold sponsor of REPM 2023, the 27th international workshop on rare earth and future permanent magnets and their application... read more >>

Eriez Shred1 Bolsters Shredders Profits Amidst Growing Low-Copper Shred Demand

The Eriez Shred1 Ballistic Separator is propelling shredder yards to greater profitability with the power to capitalize on the surging demand for low-... read more >>

Metal Recovery Solutions at E Waste World Conference 2023

The effective recovery of valuable metals is an important step in the economic viability of recycling e-waste... read more >>

Eriez Magnetic Separators are Helping the Growing Glass Industry

Eriez Magnetic Separators remove Small Tramp Metal from Silica, Soda Ash and Limestone ... read more >>

Reusing And Recycling Scrap Metal By St Clare Engineering

Sustainable production of Grab-O-Matic drum handling equipment ... read more >>

Fine Tubes Appoints New Operations Director

Precision tubing manufacturer, Fine Tubes has named Paul O'Gara as its Operations Director (designate)... read more >>

Bunting at Plastics Recycling World Expo 2023

The effective separation of ferrous and non-ferrous metal is a key stage in the successful recycling of plastic and plastic containers... read more >>

Bradley Greenwood Appointed Bunting European Sales Manager

The appointment of Bradley Greenwood as Bunting’s European Sales Manager is in response to continued sales growth in magnetic separation, metal dete... read more >>

Powder Recovery For Automotive Additive Manufacturing From Russell Finex

Global automotive manufacturer reduces 3D printing turnover time by 8 hours... read more >>

Metal Recovery By Bunting At IERC 2023

Technology enabling the separation and recovery of small and often fine metal is important when recycling electronics... read more >>

Record Breaking Year For Bunting Redditch

Bunting-Redditch registered a record-breaking sales output in 2022. Despite the global economic challenges, the demand for Bunting’s metal separati... read more >>

Fine Tubes Strengthens Presence Across Middle East With New Customer Approval

Precision metal tubing manufacturer, Fine Tubes, has been granted official approval by Qatargas to supply high performance tubes in MONEL® alloy 400 ... read more >>

Electro Magnetic Filter For European Ceramics Producer

A leading German ceramic manufacturer is cleaning ceramic glaze with a high-intensity Electro Magnetic Filter designed and manufactured by Bunting... read more >>

Bunting Builds Monster Stainless Steel Separator

The latest Stainless Steel Separation Conveyor (SSSC) leaving Bunting’s manufacturing facility in Kansas, USA is the largest built so far... read more >>

Book Your Annual Service To Ensure Safe Drum Lifting

Buying properly made forklift truck drum handling equipment from St Clare Engineering is the best way to ensure you will be able to lift, move and til... read more >>

AMETEK Fine Tubes Celebrates 60 Years In Plymouth

AMETEK Fine Tubes, is marking 60 years since moving to purpose-built premises in Plymouth, Devon, in 1962. The business was originally founded in Surb... read more >>

Zixtel Ltd Evolves with Bunting Eddy Current Separator

The Zixtel evolution began in the midst of the global pandemic in 2020, when the company changed their focus to recycling and purchased the Bunting Me... read more >>

Meet Russell Finex at Gulfood 2022 Dubai

Russell Finex is proud to announce its participation at Gulfood 2022 in Dubai... read more >>

Robert Bunting Appointed Bunting President And CEO

Robert Bunting follows in the footsteps of his grandfather and father with his appointment as Bunting’s President and Chief Executive Officer... read more >>

Safe Drum Handling From St Clare Engineering

Protect your team and your business by using the right tools... read more >>

Taking Surface Pre Treatment To The Next Level

RAUCH Landmaschinenfabrik GmbH is an international manufacturer of agricultural machinery ... read more >>

Bunting To Attend Total Metal Separation At K 2022

One of the world’s most comprehensive ranges of metal separators will feature at the international K 2022 plastics and rubber trade fair (19-26 Octo... read more >>

Recovering Excess Chromium Powder From Component Parts

Metal treatment specialist improves its production capacity using the Finex Separator... read more >>

Fine Tubes Awarded Prestigious Merit Status NADCAP NDT Re-Accreditation for Ultrasonic Testing for 10th Year Running

Specialist manufacturer of high quality, precision tubes, AMETEK Fine Tubes, has been awarded a Non-Destructive Testing (NDT) NADCAP accreditation for... read more >>

Separating Problematic Metal at POWTECH 2022 With Bunting

At POWTECH 2022 (27-29 September, Nuremberg, Germany), Bunting’s focus is on the separation of problematic metal from dry materials... read more >>

Drum Handling Equipment From St Clare Engineering Is Made To Last

Did you know that well-manufactured drum handling equipment can be expected to last for decades?... read more >>

Pedestrian Drum Handlers From Grab O Matic

For the manual lifting and moving of drums and barrels... read more >>

Parry And Evans Recover Metal with Bunting Magnetic Separators

Recycling specialist Parry & Evans has installed Bunting magnetic separators to recover metal from pre-sorted domestic waste... read more >>

Fine Metal Recovery With Bunting At RWM And Letsrecycle Live

Separating and recovering fine metals is Bunting’s focus at the RWM & Letsrecycle Live show (14-15 September 2022, NEC Birmingham, UK)... read more >>

Brutal 10nTaff Challenge Completed

“It was brutal,” said Paul Fears, our Press Officer, after completing the 10nTaff challenge for Tŷ Hafan, a children’s hospice in South Wales... read more >>

Local MP And Council Leader Attend Russell Finex Celebrations As They Mark HM The Queens Platinum Jubilee

Russell Finex mark Jubilee and raise money for cancer support charity, The Mulberry Centre... read more >>

Drum Handling Equipment Available For Hire From St Clare Engineering

Boost productivity and avoid down-time with our easy rental terms... read more >>

40 Year Old Hillhead Still Attracts Bunting

The first Hillhead was held in 1982 and over those 40 years Bunting has manufactured and supplied thousands of magnetic separators and metal detectors... read more >>

UK National Centre For Additive Manufacturing Reduces Sieving Time By 75 Per Cent

NCAM, part of the UK’s Manufacturing Technology Centre (MTC), strives to improve reliability, implement automation and meet safety requirements rela... read more >>

Recovering Metal With Bunting At IFAT 2022

Advanced separation technology enabling enhanced metal recovery is the focus on Bunting’s stand B6-452 at IFAT 2022 (Messe Munchen, Germany, May 30-... read more >>

Russell Finex Helps Chinese Additive Manufacturing Plant To Streamline Its Powder Processing

Additive manufacturing is a growing market in China. Companies like the Chengdu Tianqi Industry Group strive to improve the process by building reliab... read more >>

Stainless Steel Separation When Recycling UPVC Windows

353,000 tonnes of window profiles and related products were recycled in 2020 (source Recovinyl) ... read more >>

Quick Release Forklift Truck Attachments From St Clare Engineering

Save time and improve safety with Grab-O-Matic’s unique drum handling solution... read more >>

Bob Bunting Visits Bunting Expanding European Operation

Since 2017, the Bunting Group’s European operation has expanded considerably with investment and expansion in manufacturing facilities as well as se... read more >>

Bunting Acquires Powder Milling And Blending Specialist Pilamec

Bunting has acquired Gloucestershire-based powder milling and blending specialist Pilamec. Pilamec further broadens the Bunting product portfolio... read more >>

Chemique Asks Are Polyurethane Adhesives A Popular Choice

Due to their unique characteristics, polyurethane adhesives have been a popular choice in many industries... read more >>

Fine Tubes NORSOK Approval Extended For Specialist Alloy Tubing Products

Precision metal tubing manufacturer, Fine Tubes, has been awarded a five-year extension to its globally-recognised NORSOK approval certification to su... read more >>

Metal Recovery From Aluminium Dross By Bunting

An aluminium dross processing plant in the Middle East has purchased an Eddy Current Separator, Drum Magnet and ElectroStatic Separator to recover the... read more >>

Instant Grab Spray Adhesive From Chemique Adhesives

Bondtak 2080 from Chemique Adhesives is a synthetic, rubber based heavy-duty aerosol adhesive ... read more >>

For Easy Handling Of Your Steel Drums Choose Grab O Matic From St Clare Engineering

Steel drums are highly versatile cylindrical barrels used extensively in a variety of industries... read more >>

Martin Brear Appointed Commercial Director At Fine Tubes

Precision metal tubing manufacturer, Fine Tubes, has appointed Martin Brear to the key role of Commercial Director... read more >>

St Clare Leads The Way In Great British Engineering

Grab-O-Matic drum handling forklift truck attachments are manufactured entirely in the UK by St Clare Engineering, bringing the benefits of British en... read more >>

Ervin Introduces AMAPURE - A Mineral Additive To Clean Metallic Abrasives

Ervin is the world’s leading steel and stainless steel shot and grit manufacturer... read more >>

Advanced Metal Separation From Bunting At E Waste World

The separation and recovery of fine and small metal is vital for the successful recycling of e-waste... read more >>

The Best Forklift Truck Attachment For Your Plastic L Ring Drums

Plastic L-Ring drums, also called tight head or closed head drums, are heavy-duty drums manufactured from high density polyethylene (HDPE) plastic... read more >>

New Rotary Furnace Installation In Africa For Copper And Copper Based Alloys

Monometer has recently, during the past few months, commissioned a new rotary furnace for copper and copper-based alloys in East Africa... read more >>

3SMI Appointed Bunting Agent In Germany Austria And Switzerland

Appointment of 3SMI GmbH as exclusive agent for Bunting’s magnetic separators and metal detectors in Germany, Austria, and Switzerland significantly... read more >>

When Should I Choose A Rim Gripper To Move My Drums

Grab-O-Matic drum attachments are designed to enable you to move drums easily by forklift truck. ... read more >>

Bunting Exhibit At Ecomondo Green Technology Expo

With the Ecomondo Green Technology Expo encompassing the circular economy, the Bunting stand focuses on material recycling through material and metal ... read more >>

MagDev Acquired by Bunting

The acquisition of UK-based magnet and magnet assembly manufacturer MagDev Ltd by Bunting expands the range of magnetic solutions and technical expert... read more >>

Bunting Berkhamsted Magnet Test And Development Centre

Bunting has invested in expanding their Test and Development Centre at Berkhamsted in the UK where they specialise in the design, test and build of a ... read more >>

Bunting Launches New Shredder Feeder Conveyors

The new Shredder Feeder Conveyor from Bunting-Redditch combines with either a magnetic separator or metal detector to protect a shredder or granulator... read more >>

Should I Choose A Waist Or Rim Gripper To Move My Drums

Drums can easily be lifted by forklift truck using our Grab-O-Matic drum attachments – but it is important to choose the right lifting solution... read more >>

Magnetising And Magnet Technology At Coiltech Italia 2021

With a growth in sales of magnetising equipment and magnet assemblies into Italy in 2021, Bunting-Berkhamsted is exhibiting at the 12th Coiltech Itali... read more >>

New Bunting Redditch Customer Experience Centre

Bunting’s newly extended manufacturing facility in Redditch, UK houses a world-leading testing and laboratory centre... read more >>

Bunting Magnetic Separators For CRS Overseas Recycling Project

Bunting-Redditch has completed the manufacture and supply of three magnetic separators and one eddy current separator to recover metals in an overseas... read more >>

Metal Contamination Solutions From Bunting At Interplas

Efficient and proven methods of removing metal during plastics manufacture or recycling is showcased on Bunting’s ‘Protect, Prevent & Purify’ st... read more >>

Discover Metal Separation at RWM 2021

After a year missed due to the pandemic, Bunting is back exhibiting on stand 5-R10 at the RWM show at the NEC in Birmingham, UK (22nd to 23rd Septembe... read more >>

Why Grab-O-Matic Gripping Heads Are The Best Rim Grippers For Your Drum Handling Needs

At St Clare Engineering Ltd we build forklift truck drum handling equipment to last. ... read more >>

Tissue Company Installs Bunting Metal Detectors

A UK-based toilet tissue, facial tissue, and kitchen towel manufacturer has installed four (4) Bunting meTRON 07 CI Metal Detectors with integral conv... read more >>

Lift Fibre Drums Easily With Specialised Forklift Truck Attachments

Fibre drums are a versatile and affordable alternative to plastic or steel drums, and can easily be handled using our specialist forklift truck attach... read more >>

Extended Bunting Redditch Facility Officially Opened

After twelve months construction work, Bunting’s European Managing Director Simon Ayling officially opened the extended Bunting-Redditch facility... read more >>

Fork Lift Attachments For Your Mauser Drums

If you need to move a open top plastic drum, known as a Mauser drum, you will need specialist equipment to do so, due to the tapered shape of the drum... read more >>

Six Mobile Metal Separators From Bunting Sold In Last Three Months

Following a surge in orders for their mobile metal separator, Steelweld Enviro Products Ltd and CRJ Services have recently ordered six Bunting Eddy Cu... read more >>

Largest UK Factory Crane Maker And Exporter Of Hoists And Crane Kits Celebrate 75 Years Of Lifting

Street Crane Company, celebrate their 75th year of continual innovation in crane technology... read more >>

Two Magnetic Disc Separators From Bunting Process Coltan

A Nigerian mineral processor is installing two Magnetic Disc Separators (MDS) to separate individual minerals in a Coltan plant... read more >>

Bunting Rare Earth Roll Separator for University of Birmingham

The University of Birmingham has purchased a laboratory-scale Rare Earth Roll Separator for their School of Metallurgy and Minerals lithium-ion batter... read more >>

Recycling Growth Dependent On Technology From Bunting

Global Recycling Day provides the perfect platform for reflection and planning... read more >>

Monometer Holdings Developments In Remote Service Commissioning And Monitoring

Monometer has been kept busy with projects overseas as well as at home during the past year of lockdowns and travel restrictions... read more >>

St Clare Forklift Drum Handling Attachments Made For The World

Did you know that St Clare Engineering exports more than 30% of its drum handling equipment?... read more >>

Bunting Secures Major Export Recycling Equipment Order

A large UK recycling plant constructor has ordered one (1) Eddy Current Separator and three ElectroMax Overband Magnets for a major overseas construct... read more >>

Manufacturing A Bespoke Mobile Mixing Bowl Lifter And Tilter With St Clare Engineering

If you take a look at the range of bespoke products we manufacture you'll see we turn our expertise to a broad range of drum attachments to solve prob... read more >>

Electrostatically Recovering Copper Wire From Bunting

A combination of an ElectroStatic Separator and a Metal Separation Module is enabling the recovery of fine copper and other metals from a waste produc... read more >>

New Attractive Bunting eMagnets eCommerce Magnets Website

An extensive range of magnets and magnetic products feature on the new Bunting-eMagnets e-commerce website... read more >>

Dirk Mylich Appointed Bunting European Recycling Product Manager

Dirk Mylich has assumed the new position of Bunting’s European Recycling Product Manager... read more >>

Eriez Europe Is Drumming Up Profit For The Scrap Industry

The scrap metal industry has long been a key sub-sector of the UK economy, further emphasised after such a tumultuous year for heavy industries... read more >>

Bunting Electro Overband Magnet Protects Gold Mine

The largest Electro Overband Magnet ever built at the Bunting manufacturing plant in Redditch, UK is destined for installation in a gold mine in North... read more >>

Cygnus Supporting Calshot Trust With Cygnus Ultrasonic Thickness Gauge

During April, Cygnus Instruments Ltd were approached by a potential customer who asked about the prices for a suitable gauge for measuring the thickne... read more >>

Two New Permanent Overband Magnet Models From Bunting

Bunting has added two new models to their popular and highly successful range of Permanent Overband Magnets... read more >>

Bunting Joins bvse In Germany

Bunting has joined bvse-Bundesverband Sekundärrohstoffe und Entsorgung (The German Federal Association for Secondary Raw Materials and Disposal)... read more >>

Magnetic Disc Separator From Bunting Processes Beach Sands

Bunting’s latest Magnetic Disc Separator (MDS) is for processing and separating key minerals from a beach sands deposit... read more >>

Ervin 100 Year Anniversary

In 1920, the foundry man and Engineering graduate from the University of Illinois, John F. Ervin founded Ervin Industries, which means that this year ... read more >>

Three High Sensitivity Metal Detectors For Nappies

An Egyptian paper mill has purchased three meTRON 07 CI Metal Detectors mounted on conveyors to detect metal in the tissue paper used as the filler in... read more >>

Bunting Announces New Sales Engineer Appointments

Following a sustained period of growth and expansion, Bunting announces the appointment of three sales engineers to their Redditch and Berkhamsted tea... read more >>

Bunting European Sales Conference 2020

Bunting distributors from across Europe converged on the Redditch site for the inaugural European Sales Conference... read more >>

Eriez Takes Charge Of Its Future With New Capacitive Charger

After years of continued growth, Eriez Magnetics Europe has invested in a second capacitive charger to keep up with demand; a powerful system dubbed '... read more >>

Bunting Announce Redditch Site Expansion

Following several years of sustained sales growth, Bunting is expanding their manufacturing plant and offices at the Redditch site just outside Birmin... read more >>

Innovation Challenges Solved For Research And Development In 2020

Leading global materials supplier Goodfellow has put together a comprehensive package of support tools and products... read more >>

Alan Why Appointed Bunting UK Sales Manager

Bunting has promoted Alan Why to the position of UK Sales Manager overseeing all external sales activity. Alan has successfully developed magnet-rela... read more >>

New European Sales Office For Bunting

A focus on developing business on the European mainland has led to Bunting opening a new sales office for Central and Northern Europe in Vienna, Austr... read more >>

The Benefits Of A Mechanical Forklift Truck Drum Handling System From St Clare Engineering

Our use of a mechanical operating system in our Grab-O-Matic products offers the greatest reliability to our clients, no matter where in the world the... read more >>

Bunting Establish Italian Office

Bunting has appointed Stefano Maiaroli to head up business development in Italy and Southern Europe... read more >>

Eriez Stake In Sustainability As Only Magnetic Separation Manufacturer Within Wales

Eriez Europe is already highly familiar with the UK government's renewed commitment to "[ensuring] producer responsibility and a consistent approach t... read more >>

Rare Earth Magnets Recycling Task Force

The launch of the European Union (EU)-funded SUSMAGPRO project took place in Germany in June 2019... read more >>

Metal Recovery Technology at Ecomondo 2019 With Bunting

The atmosphere at the K2019 Trade Fair (Dusseldorf, Germany 16-23 October 2019) was very positive despite the increasing global negativity surrounding... read more >>

Metal Recovery Technology From Bunting At Ecomondo 2019

Technology to recover ferrous, non-ferrous and stainless-steel metal from waste and secondary materials is the focus on stand A2 008 at the green tech... read more >>

Why Customers Stick With Grab O Matic Mechanical Fork Attachment Drum Handlers

Many of our customers have been using the Grab-O-Matic forklift drum handlers for over 30 years and they still come back for more... read more >>

Fatemeh Taghizadeh Is 2019 Goodfellow PhD Award Winner

The 2019 Goodfellow PhD Award for the best PhD publication by a South African student in the field of the Physics of Materials and Matter has been pre... read more >>

University of Birmingham Acquires Laboratory Eddy Current Separator From Bunting

The University of Birmingham has purchased a laboratory-sized Eddy Current Separator and Drum Magnet modular system from Bunting-Redditch... read more >>

Warning Signs That Your Forklift Attachment Is About To Fail

When using fork attachments or drum handlers there are common danger signs to look out for that indicate the equipment may be about to fail... read more >>

Metal Separation From Virgin And Recycled Plastics At The K2019 Exhibition

Removing metal from virgin and recycled plastics is the focus on the Bunting Magnetic stand (Hall 10/J 47) at the international K 2019 exhibition (16-... read more >>

Science in Video Competition for 2019 Announced

The Science in Video (SciVid) competition for 2019, open to everyone passionate about Materials Science and Engineering, has been announced ... read more >>

The Ervin Team Are Celebrating A Successful Exhibition At GIFA 2019 In Dusseldorf

A brand-new stand, leading edge technology and a warm welcome for all visitors combined to create a great impression... read more >>

Goodfellow Supplies Research Materials For Academic Advancement

Goodfellow, leading global supplier of materials for more than 70 years, recently provided two museums and a university with materials that educate as... read more >>

The Goodfellow Green Production Initiative Fostering Sustainability Fuelling Innovation

Products available through the Goodfellow Green Production initiative strike a favourable balance between product quality and reducing the product’s... read more >>

Fine Tubes Names Peter Brown Key Equipment And Facilities Manager

AMETEK SMP Fine Tubes, is pleased to name Peter Brown as its new Key Equipment and Facilities Manager... read more >>

The Last Straw For Plastics From Eriez Europe

The Xtreme Metal Detector Eriez Europe sold to Transcend Packaging Ltd is being used to inspect paper drinking straws prior to packaging... read more >>

Cross Die Caster Plunger Rings Deliver High Efficiency And Reduced Down Time

Cross plunger rings are specifically designed and engineered for die casting machines working with a wide variety of materials... read more >>

New Multi Lingual Content Is The Solution For Ervin Steel Abrasives Website

Ervin, the world’s leading steel and stainless steel shot and grit manufacturer, has added a range of exciting new features to its new website... read more >>

Cross Brochure Illustrates High Temperature Sealing Solutions For Automotive Applications

A new Cross Manufacturing Company brochure illustrates the company’s comprehensive range of high temperature metallic sealing and retaining ring sol... read more >>

Six Metre Double Stacked Eddy Current Separator Module Supplied To St Margarets Recycling For Complete Metal Recovery

Eriez Europe has provided a one-stop custom solution to St. Margarets Metal Recycling and Transfer Centre metal recovery problem within their scrappin... read more >>

Reading Alloys Senior Metallurgist Highlights Importance Of Titanium Powders For Medical Applications At APMI West Penn Presentation

Muktesh Paliwal, Senior R&D Metallurgist at Reading Alloys, was a keynote speaker at a monthly Technical Session of the West Penn Chapter of APMI Inte... read more >>

Eriez High Sensitivity Metal Detector To Make Debut Outside Of UK At POWTECH 2019

Metal contamination can have a critical effect on processing lines... read more >>

Bunting Magnetics Europe New Recycling Test Facility

Following an increase in the demand for material testing, has constructed a new recycling test facility at their Master Magnets manufacturing operatio... read more >>

Russell Finex Finalists of 2018 Hounslow Business Awards

Sieving and filtration manufacturer, Russell Finex, is shortlisted for four awards, and is recognised for its contribution to the community... read more >>

AMETEK SMP Develops New Titanium Strip Products For Ground Breaking Medical Applications

Hamilton Precision Metals and SMP Wallingford are delighted to announce that they have added two new Titanium strip grades – grade 9 and 23 – to t... read more >>

2018 Marks A Record Year Of Sales For Eddy Current Separators

In 1969, Eriez Magnetics was the first company to patent both permanent magnetic and electromagnetic Eddy Current Separators (ECS)... read more >>

Drum Handling Forklift Attachments That Will Not Let You Down

To comply with health and safety rules in the workplace, maintaining machinery and equipment, and keeping proper records, is crucial. ... read more >>

Serving The Aerospace Industry For More Than 75 Years

Through its key brands Reading Alloys, Fine Tubes, Superior Tube and Hamilton Precision Metals - AMETEK Specialty Metal Products (SMP) has been servi... read more >>

Sifting Bakery Ingredients At Warbutons With Russell Finex

Family baker, Warbutons installs the Russell Compact 3in1 Sieve to protect the quality of their raw ingredients... read more >>

Bunting Provide Technical Support at Two Scandinavian Exhibitions with Tekemas

Bunting local representative Tekemas has exhibited at two Autumn international trade shows in 2018... read more >>

Renishaw Showcases Smart Factory Solutions At IMTEX 2019

Global engineering company, Renishaw, returns to IMTEX for the show’s 50th anniversary, which takes place at the Bangalore International Exhibition ... read more >>

Key Appointments At Superior Tube To Further Strengthen Its Operational Excellence

Superior Tube, part of AMETEK Specialty Metal Products and leading manufacturer of small diameter tubing is delighted to announce several key appointm... read more >>

24 Drawer Filter Magnets Destined For France

24 Drawer Filter Magnets are under manufacture at our European HQ in Berkhamsted, UK. The Drawer Filter Magnets are destined for installation in a pl... read more >>

How Forklift Truck Drum Handling Attachments Contribute To Good Health And Safety Practice

Employers and employees have legal responsibilities for ensuring health and safety procedures are in place and followed... read more >>

Precision Metal Strip And Wire For Medical Devices At Medical Design And Manufacturing Minneapolis

MD&M Minneapolis is the largest medtech event in the US Midwest, offering both a major supplier showcase as well as extensive educational and networki... read more >>

Eriez Europe Expands With New Manufacturing Facility

Eriez Europe has opened a brand new 326 square metre manufacturing facility dedicated to rotor manufacturing, light fabrication assembly and additiona... read more >>

High Quality Master Alloys Powder And Tube Presented At TITANIUM USA 2018

Meet the AMETEK SMP Team at the Bellagio Las Vegas, Booth #310... read more >>

Chemique Adhesives Launches New Manufacturing Adhesives Brochure

Chemique Adhesives has recently launched a new brochure that showcases its innovative range of adhesives that have been developed to solve today’s m... read more >>

Taylor Hobson Launches New Form Talysurf PGI NOVUS With Metrology Software

Taylor Hobson today announced the launch of new Form Talysurf® PGI NOVUS, powered by Metrology 4.0 software. It is the most advanced system for surfa... read more >>

AMETEK SMP To Promote Titanium Capabilities At Farnborough

Did you know that Plymouth in the South West of England is close to the birthplace of titanium - first discovered nearly 230 years ago?... read more >>

High Performance Tube Strip And Powder Products For Critical Aerospace Applications At Farnborough Air Show

AMETEK Specialty Metal Products (SMP) will be exhibiting at the Farnborough International Airshow from 16th to 20th July. Visit us at Booth 4024, in H... read more >>

Optimum Metal Recovery With Eriez At Metals Recycling Event 2018

From the 11th to 12th of July 2018, Eriez Europe will be exhibiting on stand Q1 at the Metals Recycling Event (MRE), at the NAEC in Stoneleigh, UK ... read more >>

EcoVyn Reduce Waste By 94 Per Cent With Bunting Drawer Magnets

EcoVyn Ltd has installed two Bunting Drawer Filter Magnets to remove ferrous metal contamination from plastic waste... read more >>

Hydro Precision Tubing Tonder Selects Banyard LFi Smart System

Inductotherm - Banyard are pleased to announce the successful contract for supply to Hydro Precision Tubing Tonder (HPTT) plant in Denmark, with immin... read more >>

Russell Finex Sieving And Filtration Equipment At ACHEMA 2018

Russell Finex presents range of separation technology at world forum for the process industries... read more >>

Fine Powders of Metals Ceramics and Polymers

Goodfellow offers more than 200 metals and materials in powder form for use by researchers and design engineers... read more >>

Russell Finex Wins Solids Handling And Processing Association Export Award

The SHAPA Awards 2018 came to the SS Great Britain on the 17th April to showcase the achievements of those in the solids handling and processing indus... read more >>

Russell Finex Sieve Qualifying Metal AM Powders

Automated AM powder sieve ensures the quality of 3D printing powders before and after the build process... read more >>

Great Success for Inductotherm Heating And Welding At Tube And Wire

After an extremely hectic / busy week, Friday saw the end of yet another very successful Tube and Wire exhibition in Dusseldorf... read more >>

Russell Finex Selected For Sunday Times Profit Track Ones To Watch

Manufacturer included in the Sunday Times Profit Track Ones to Watch following record year... read more >>

An Invitation From RMI Pressure Systems To AISTech 2018 Philadelphia

Our Intelligent High-Pressure Pumps and Systems offer the highest level of reliability and an impressive return on investment... read more >>

Industrial Sieves For Dry Bulk Powders From Russell Finex

Compact and versatile industrial sieving equipment for separation and check-screening bulk solids and powders... read more >>

Eriez Europe And Ecohog Unite To Clean-Up The Mobile Eddy Current Market

Increasing maintenance costs and strict health and safety regulations are currently faced by companies in the recycling and waste industry... read more >>

The Real Costs Of Business Banking And The Real Alternative

If the UKs small businesses realised the true potential of the export opportunities out there they could contribute an extra £141bn to the UK economy... read more >>

Permanently Moving Forward At Eriez Europe

The permanent suspended overband magnet is a magnetic separator that is well-established within the Eriez portfolio... read more >>

Bunting Europe Announces Record Monthly Sales

Bunting Magnetics Europe Ltd has had two consecutive months of record sales in September and October 2017... read more >>

Inciner8 Add Their Weight To Fighting Knife Crime In London

You only need to pick up a paper or turn on your local news to hear of another life ruined by knife crime. Sadly, the weaponisation of youth culture i... read more >>

Russell Finex Shortlisted For Manufacturer MX Awards 2017

Global leader Russell Finex shortlisted in World Class Manufacturing category at this year’s The Manufacturer MX Awards... read more >>

Hounslow Business Awards Winners 2017

Russell Finex named Business of the Year, Innovator of the Year and Best Business for Marketing and Social Media at annual awards ceremony... read more >>

Double PPMA Awards Winners

PPMA Group Awards 2017 see Russell Finex named Exporter of the Year and Environmental Initiative of the Year... read more >>

PPMA Group Awards Finalists 2017

Range of companies celebrate achievements in the processing and packaging industry at annual awards gala... read more >>

Hounslow Business Awards Finalists 2017

West London businesses celebrate their achievements at prestigious local awards show... read more >>

Monometer Helps West Country Foundry Resolve Crucible And Melting Problems

Monometer was approached by West Country Tiling to comment upon and try to resolve reoccurring failures in their furnace crucible, and a variable melt... read more >>

Cascade System For Industrial Separators

Increase capacity and sieving efficiency when screening powders and granules with innovative cascade system... read more >>

Local Hero Mo Farah Factory Mural At Russell Finex

Russell Finex and Richard Wilson commemorate local hero with iconic mural on factory wall... read more >>

Goodfellow Celebrates 50 Years In A Material World

Tucked away in a Cambridgeshire business park is a company that has quietly grown to be one of the most respected suppliers of research-grade metals, ... read more >>

Bunting Magnetics Secures Quality and Environmental Accreditation

Bunting Magnetics Europe has successfully transitioned to the new ISO9001:2015 Quality and ISO 14001:2015 Environment Standards... read more >>

New Compact Suspended Overband Magnet To Make Debut At Steinexpo 2017

Eriez Europe will be showcasing the latest solutions in metal detection and removal for the mining and quarry industries at the Steinexpo show in Homb... read more >>

Screening Metal Powders At Deloro Stellite

High performance vibratory screener cuts product changeover time by 300% and achieves ROI in months at U.S alloys plant... read more >>

BLM Launches Get Lead App

BLM are to strengthen their support to roofing contractors and Leadworkers with the launch of a new smartphone app during July... read more >>

Grand Opening Of New Manufacturing Plant For Inductotherm India

Inductotherm India held an official dedication ceremony and Grand Opening of new Manufacturing Plant in Ahmedabad, India last month... read more >>

Round Separators For Atomised Solder Powder

Round separators for metal powders help Atomising Systems Ltd screen fine atomised solder powder whilst increasing production capacity 4-fold... read more >>

Boron Nitride Is Versatile In Form And Function

Goodfellow offers an extensive range of boron nitride in many forms, most in stock and available for rapid shipment... read more >>

An Invitation From RMI Pressure Systems To Aistech 2017 Nashville

Our Intelligent High Pressure Pumps and Systems offer the highest level of reliability and an impressive return on investment... read more >>

Professional Noise Awareness Training In The UK

Pulsar Instruments are holding face to face courses for HSE professionals... read more >>

MESU Acquires Another Welder From Thermatool

Metallwerk Sundern Otto Brumberg GmbH & Co have recently installed another 350kW HF welder with HAZControl technology from Thermatool. Based in Sunder... read more >>

Interactive Application Finder For Processing Industry Professionals

Online interactive equipment selector aids processing industry professionals when selecting and buying machinery... read more >>

Vibratory Screener For Reclaiming Metal Powders For Reuse Post Production

The quality of fine metal powders, such as titanium, bronze, copper and aluminium used in the impacts the quality of the final product... read more >>

New Product For Innovative Research - 2D Crystals For Exfoliation

Goodfellow is pleased to introduce a range of 2D crystals that enable researchers to make their own 2D materials in the Laboratory... read more >>

Banyard Seminar Highlights Benefits Of Low Frequency Induction

Just before Christmas, Inductotherm Group colleagues from Europe, Russia, USA, Taiwan, Japan and China, India and Korea, joined a Technology mastercla... read more >>

Monometer Furnaces For Tin Ingot Production

Monometer has continued to develop rotary furnace equipment for the recovery of tin from tin drosses, general scrap, slag and filter dust... read more >>

Monometer Rotary Furnaces Offer Lower Cost Production For Copper Aluminium Irons And Lead

Monometer refining technology is now being applied successfully to achieve selective removal of heavy metal impurities down to <100ppm in copper secon... read more >>

Pulsar Instruments Publishes Employers Guide On Controlling Workplace Noise

Pulsar has published a short guide entitled ‘5 Steps to controlling workplace noise’ aimed at safety and health professionals with the responsibil... read more >>

See It Before You Hear It

Noise at work monitoring experts, Pulsar Instruments, have developed a simple warning system suitable for both noisy and quiet working environments... read more >>

New Opportunities For Global Distribution

Pulsar Instruments is one of UK’s foremost manufacturers of noise measurement instrumentation for occupational safety compliance, with an establishe... read more >>

Noise At Work Wizard Now Available

If you are new to workplace noise measurement, choosing the perfect tool for your application can be quite confusing and time-consuming... read more >>

ECOBAT Is Strength Behind BLM Market Leading Position

In 2017 BLM British Lead will celebrate its 85th birthday... read more >>

Aluminium And Copper Foils In Dozens Of Thicknesses

Goodfellow is known worldwide for its huge range of metal foils – foils of more than 160 metals and metal alloys to meet specific scientific and ind... read more >>

Controlling Scrap And Reducing Costs

McKenna Precision Castings has taken further leaps into reducing the cost of production by re-engineering their manufacturing process... read more >>

Goodfellow Award Presented At South African Institute Of Physics Annual Conference

Mr. Xin-Liang Yan, a doctoral student at the University of the Free State, is the winner of the Goodfellow Award for Best Publication by a PhD Student... read more >>

Solving The Problem Of Metal Contamination

Metal Separation Equipment will be displayed by Bunting Magnetics Europe in Hall 10 on stand G16 at the International Plastics and Rubber trade fair, ... read more >>

APCRG Responsible Business Champion 2016

Award-winning sieving and filtration manufacturers recognised by government initiative... read more >>

Copper Zinc Alloy Powder Coating Screener

Ultrasonic sieve improves capacity and removes impurities of metal based powder paints and coatings... read more >>

Ultrasonic Sieving Adopted By Powder Coating Industry Giant Jotun

Over the past few decades, the powder coating industry has seen double-digit growth in the US and Europe... read more >>

How Do Vibratory Screeners And Rotary Sifters Compare

When it comes to safeguarding product quality and screening accuracy, the Russell Compact Sieve – a high-performance vibratory screener - is the mos... read more >>

Fine Tubes And Superior Tube Are Awarded Contracts By Airbus

UK-based Fine Tubes and US-based Superior Tube, global suppliers of precision tubes for critical applications, have both been awarded contracts by lea... read more >>

Inductotherm Group Is Returning To The Tube And Wire 2016 Conference Dusseldorf Germany

The conference will take place from 4th – 9th April with participation in both Halls 06 (stand C40) and Hall 09 (stand C66)... read more >>

New Digital Strategy And Website From Bunting Europe

UK based magnet and magnetic separator equipment manufacturer, Bunting Magnetics Europe, has launched a new dynamic and responsive website as part of ... read more >>

Innovative Range Of High Capacity Self Cleaning Filters

A new range of high capacity self-cleaning filters, providing high volume and continuous production, has been added to the award-winning, high perform... read more >>

Russell Finex Discuss UK Manufacturing In Detail With Parliamentary Review

Russell Finex has been selected to represent the manufacturing industry in this year’s Parliamentary Review... read more >>

Bunting Metal Separator Cleaning Sodium Bicarbonate In Pakistan

Bunting Magnetics Europe Ltd has secured an overseas contract from Pakistan to supply Metal Detectors to identify and remove rogue metal from refined ... read more >>

First Appearance Of The Stainless Steel Separator In Germany

The first appearance in Germany of the new High Intensity Separation Conveyor (Stainless Steel Magnetic Separator), designed and manufactured by Bunt... read more >>

Best Business Award For Marketing And Social Media

Leading sieving and filtration equipment manufacturer rewarded for supporting global customer base... read more >>

Russell Finex Connections For Better Sieving And Screening

Russell connector upgrades enhance machine performance and product quality ... read more >>

Ham Baker Group Shows Mettle With New Steel Standard

Ham Baker has become one of the few companies able to service the water and wastewater industry by manufacturing stainless steel structural products u... read more >>

Wide Range Of Rare Earth Metal Foils Available

A wide range of rare earth metal foils is available from Goodfellow, a leading supplier of high-purity metals and materials for research and industry... read more >>

Innovative Chemical Separation Equipment Displayed At ACHEMA 2015

Held every 3 years, ACHEMA is Europe’s largest tradeshow for the chemical engineering and processing industry... read more >>

Goodfellow Award Presented At South African Institute of Physics Annual Conference

The Goodfellow Award, bestowed at the South African Institute of Physics (SAIP) conference each year, is funded by the Goodfellow Group of Companies... read more >>

New Stainless Steel Separator Operating At RWM 2015

This will be the first time the Stainless Steel Separator has been exhibited in Europe... read more >>

High Demand For Titanium Tubing Generated By Increasing Global Aircraft Build Rates

Fine Tubes and Superior Tube (United States), leading global manufacturers of high precision tubing in titanium, stainless steel and nickel alloys, en... read more >>

Export Became A New Concept For DA Cooper and Sons When Jack Watson Joined The Company In 2012

Initially, much time was given to avid research, along with persistent telephoning & e-mailing Jacks' previous customers & overseas acquaintances... read more >>

Showcasing the Radyne Clamshell At OTC Exhibition

Inductotherm Heating & Welding recently exhibited at the OTC exhibition in Houston, Texas. The show attracted over 94,700 attendees over a four day pe... read more >>

New Look With Better Connections To Customers

More than a year ago, Inductotherm Group took on a critical mission. A complete redesign of our corporate and all of our company websites... read more >>

New Range Of Multi Mode Ultrasonic Thickness Gauges

Cygnus Instruments, the leading manufacturer of Multiple-Echo digital ultrasonic thickness gauges used for measuring remaining metal thickness, unveil... read more >>

On Demand Intelligence Delivers Savings For High Pressure Pumps

High pressure, high flow pumps require considerable energy input in order to deliver the demands of each application, be that in the mining or the ste... read more >>

Qdos Dosing Pumps Improve Production Uptime At Aluminium Coating Plant

Aluminium powder coating specialist, France Alu Color, has reduced its costs for chemicals and further improved the reliability and safety of its surf... read more >>

Leading European German Tube Mill Manufacture Selects Thermatool

Inductotherm Heating and Welding are pleased to announce that a leading European German Tube Mill manufacturer has ordered another Thermatool Solid St... read more >>

New Stateside Appointment At Spooner Industries

Jeff Privatt has joined Spooner Industries, strengthening the customer facing team in the USA... read more >>

Screening Fine Metal Powders

It is common practice to screen fine metal powders when used in the coating industry to ensure an even coat is applied and to prevent blockages to equ... read more >>

Reliability And Innovation Are Crucial In High Pressure Pump Design

The use of high pressure pumps, up to 1,000 bar, is widely seen in a variety of industries, including mining, steel production and oil & gas, each of ... read more >>

Personnel De-Duster Is More Powerful Yet More Compact

JetBlack, the blower powered personnel de-dusting unit from ACI, has been re- modelled, and upgraded. The new unit is more compact yet has a greater a... read more >>

New Indian Steel Plant Will Receive 11 De-Scaling Pumps From RMI

RMI is helping to complete the construction of the new 3 million tonne per annum Integrated Steel Plant in Nagarnar, India, with the delivery of 11 S5... read more >>

RMI Provides Long Term Pump Reliability To Sheffield Forgemasters International

Sheffield Forgemasters International Limited is a pioneering, high technology dependent company engineering some of the world's largest and most compl... read more >>

Latest Developments In Descaling Technology And How Efficiency Can Be Maximised

Steel rolling mills, like most modern industries across the world, are looking to improve efficiency and product quality by investing in technology wh... read more >>

RMI Delivers 11 Pumps For Descaling In New Indian Steel Plant

Building a brand new steel plant from the ground up is no small task, rather one which requires extraordinary amounts of planning and careful engineer... read more >>

Eriez Showcases Hydroflow Range At MACH 2014

Eriez, a leading authority in separation technologies will showcase the newly acquired division Hydroflow Europe at MACH 2014, NEC Birmingham 7-11 Apr... read more >>

High Pressure Pumping Systems Within The Steel Industry

The steel industry encompasses a large number of very different processes, from the smelting of the raw materials to the rolling and shaping of the fi... read more >>

Fine Tubes Develops Seamless Titanium Tubing For Airbus And Liebherr

Fine Tubes, a leading manufacturer and global distributor of precision tubes for critical applications, is currently producing seamless Grade 9 and Gr... read more >>

RMI Delivers Pump Systems To Taiwanese Aluminium Mill

Aluminium is used in a huge variety of products, due in part to the wide range of surface treatments and coatings that can be applied to it as part of... read more >>

New De-Scaling Equipment Offers Improved Efficiency

Steel rolling mills, like most modern industries across the world, are looking to improve efficiency and product quality by investing in technology wh... read more >>

Oxford Instruments Launches Portable Cordless Metal Analyser

Oxford Instruments introduces a new portable arc / spark metal analyser, the PMI-MASTER Smart... read more >>

Oxford Instruments Introduce Service Plan Agreements

Oxford Instruments has announced a series of comprehensive Service Plan Agreements for its handheld analysers enabling customers to protect their inve... read more >>

Adapting Aerospace Technology To Meet Outer Space Demands

Within the aerospace industry, the pressure is always on to develop new materials that can meet the demands for higher performance at reduced weight a... read more >>

Industrial Pumps Prove Reliability At Sheffield Forgemasters

Steel production is not only a very demanding industry but also very competitive, this means that every effort must be made to ensure the best possibl... read more >>

A Success Story With A Perfect Finish

The Steel Abrasives business defines the highs and lows of European Manufacturing over recent years, with its wide range of applications... read more >>

Non Contact Linear Measurement Sensor For Quality Control In Precision Manufacturing

New AMETEK Solartron Metrology Orbit® LT Laser Triangulation System has industry’s widest range of output options ... read more >>

High Performance Metals Analyser Designed For The Foundry And Metals Industry

Oxford Instruments’ new spark emission spectrometer FOUNDRY-MASTER Xline supports foundries and metal producers in determining metal samples fast an... read more >>

Russian Preview For Thermatool And Radyne

Tube Russia 2013 will take place at the Krasnaya Presnya Expocentre Fairgounds, Moscow from 25-28 June 2013. ... read more >>

Fine Tubes Attending Landmark Paris Air Show

Fine Tubes will be presenting its latest high specification tubes at the landmark 50th edition of the Paris Air Show next month, the largest aviation ... read more >>

Non Contact Linear Measurement Sensor

For quality control in precision manufacturing the new AMETEK Solartron Metrology Orbit LT Laser Triangulation System has industry’s widest range of... read more >>

BHR Group Announces The 22nd International Conference On Fluid Sealing

BHR Group, internationally recognised global consultants in innovative fluid engineering, announces the 22nd International Conference on Fluid Sealing... read more >>

Thyssenkrupp Uses Airknives To Reduce Energy Costs

At the ThyssenKrupp Dortmund Beta plant, where steel strip is manufactured, an airknife drying system is helping to enhance efficiency and significant... read more >>

The Need For Speed As Time Is Money

The new X-MET7000 eXpress handheld XRF analyser is the fastest to ‘power up’ and now offers 4 times faster analysis... read more >>

Handheld Analysers Increases Profit For Recyclers

Oxford Instruments handheld XRF analysers support recyclers of automotive catalytic converters to determine precious metals fast and accurately whilst... read more >>

Next Generation Scrap Metal Analyser

Oxford Instruments’ X-MET7500 Scrap Metal Analyser is the ideal tool for reliable identification of scrap metal for on-the-spot sorting and valuatio... read more >>

Inductotherm Helps Ukrainian Company Extends Production Capability

Dniprovskiy Pipe Works (DPW) Ukraine has recently installed and commissioned a new Thermatool CFI 350 Welder at its new production facility... read more >>

Extreme Performance Lithium Complex Grease

Ironsides Lubricants Ltd is pleased to announce the launch of new extreme performance lithium complex grease. ... read more >>

Thermatool And WEMPCO Agree Supply Of High Frequency Induction Welders

Tuesday 27 March at the International Tube & Pipe Fair in Dusseldorf marked a significant day for both Thermatool and Western Metal Products Company ... read more >>

New Hand Held Analysers For Trace And Light Elements

Oxford Instruments is proud to launch a new member of its handheld XRF analyser X-MET7000 series, the X-MET7500.... read more >>

New Induction Heating Technology At Tube And Pipe 2012

The annual International Tube & Pipe Fair takes place in Dusseldorf, Germany between 26 and 30 March 2011.... read more >>

Precious Mixing Order For Pfaudler And Chemineer

Pfaudler has won an important order from South Africa to upgrade mixers for one of the world’s leading refiners of precious metals, who are set to i... read more >>

Leading UK Water Treatment Company Helps Ukrainian Firm Grow

B & V Water Treatment has helped a Ukrainian client break into the Russian market and increase turnover by 500% in two years – thanks to a licen... read more >>

Magnetic Filtration Is The Quickest Way To Cut Machining Costs

When Glenn Healey installed Micromag magnetic filters on his company’s screw and CNC machines he was expecting to see cost savings on cutting oil an... read more >>

Guyson Blast Finishing Improves PVD Coating Effectiveness

Guyson International is one of the worlds leading manufacturers of industrial blast finishing equipment used for the surface preparation of components... read more >>

Spooner Launches New Website for Processing Industries

Spooner Industries has launched a new fully interactive website available in over 50 languages to ensure customers all over the world can access the d... read more >>

Eriez High Sensitivity Metal Detector To Make Debut Outside Of UK At POWTECH 2019

Metal contamination can have a critical effect on processing lines... read more >>