Denso Protection System For National Grid LNG Tank Bases

Winn & Coales Denso Tank Base Protection System is being used at the Isle of Grain National Grid site on four of their LNG storage tanks

by Andy Stuart | Thursday 2 February 2017

To meet various operating conditions at the Isle of Grain National Grid site the Denso Tak Base system was chosen to give effective protection
Following surface preparation, Denso Hi-Tack Primer and Denso Primer D were applied. Densyl Mastic was then applied in the gap between the tank and the base. This not only provides a sealant between the concrete and tank base to prevent entrapment of water but also a smooth profile when applying the following Denso Hi-Tack Tape. A single layer of Denso Ultraseal RT Tape was applied and then finally a topcoat.
The Denso Tank Base Protection System is flexible enough to move with the tank when it gets filled and emptied and provides a tough outer armoring. The highly weather resistant system provides a long-lasting solution to Tank Base problems.


Andy Stuart
Winn & Coales (Denso) Ltd
+44 20 8670 7511

Thursday 2 February 2017 / file under Construction | Engineering | Utilities