Denso Protection System For Hereford Water Pipeline

Lewis Civil Engineering is currently constructing an 8km length water main pipeline in Hereford for Dwr Cymru Welsh Water

by John Bean | Saturday 28 July 2018

Denso_Hereford_Water_Pipeline.jpg
Winn & Coales (Denso) Ltd were contacted for information on the most suitable anti-corrosion system along with application training of Lewis Engineers for the pipeline's Viking Johnson joints.

The selected Denso system meets the P2 Civil Engineering Specifications for Water Industry and consists of Denso Primer D™, Profiling Mastic and 150mm width Densoclad™ 70 Tape. Denso Profiling Mastic is a vital part of the system, it is applied to seal the voids, bolts and heads around the joints to avoid moisture entrapment. The Densoclad™ Tapes consist of a thick polymer-bitumen adhesive, giving superior adhesion and flexibility, laminated to a tough plasticised PVC backing.

It is expected that Lewis Civil Engineering will install more than six hundred 700mm by 600mm joints and nearly two hundred 700mm diameter Viking Johnson joints. In addition to this there are six 450mm diameter spigot & socket joint pipes. All pipe lengths and joints were supplied in new condition, so no blasting pretreatment was required.

The Denso materials were supplied via Burdens Civil Group, Merthyr Tydfil.

CONTACT

Andy Stuart
Winn & Coales (Denso) Ltd
mail@denso.net
www.denso.net
+44 20 8670 7511

Saturday 28 July 2018 / file under Construction | Engineering | Utilities | Water